"We cannot solve our problems with the same thinking we used when we created them."

- Albert Einstein

Industrial Courses

Please click on the course titles below for more information.

  • Dangerous Goods Bulk Driver Course
    Open or Close
    Course Duration
    2 Days 8:00am to 4:00pm (Min 6 Participants)
    Course Start Date/s

    16 June 2018
    18 June 2018
    7 July 2018
    Course Cost
    $365.00 per student
    Course Code
    TLILIC0001 (Licence to transport dangerous goods by road)

    As of the 28th of October 2013 the Dangerous Goods Bulk Driver Refresher Course and the Dangerous Goods Classes 3 9 Course have become obsolete. All clients wishing to refresh their license are now required to complete the 2 day Bulk Dangerous Goods Driver's course.

    Content

    • Transport procedures
    • Fire-Fighting equipment training
    • Breathing apparatus
    • Documentation
    • Placarding of containers and vehicles
    • Statutory Requirements/ Responsibilities
    • Placard all Units and package loads
    • Classification and Packing of Dangerous Goods
    • The HAZCHEM Code
    • Stowage and segregation

    Please go to the Mainroads website should you have any question or require more information:

    https://www.mainroads.wa.gov.au/UsingRoads/HeavyVehicles/Pages/HeavyVehiclesHome.aspx

  • Load Restraint Training
    Open or Close
    Course Duration
    1 Day 8:00am to 4:00pm
    Course Start Date/s

    25 June 2018
    23 July 2018
    27 August 2018
    24 September 2018
    Course Cost
    $250.00 per student
    Course Code
    TLID2004, TLIA1001 and TLIE3002

    Content

    • Performance standards
    • Minimum restraint requirements
    • Dangerous Goods Requirements
    • Oversize loads
    • Loading general freight
    • Load Securing equipment
    • OH&S Requirements
    • Load Restraint Guide
    • Responsibilities and Legislation
    • Forces which cause movement
    • Tie down and direct systems of restraint
    • Load Distribution
    • Load Limitation

  • Safe Load Program
    Open or Close
    Course Duration
    Half a day (08:00 - 12:00)
    Course Start Date/s
    25 May 2018
    22 June 2018
    20 July 2018
    24 August 2018
    21 September 2018
    Course Cost
    $260.00 per student

    The Safe Load Program is a requirement for drivers to gain entry to refineries and storage facilities.  This program applies to all bulk fuel road tankers that load products at gantries supplying goods and combustible liquid at all oil industry facilities

    LICENSING/REGULATORY REQUIREMENTS

    Participants must be over 21 years old to participant in this course.

    • Road Traffic Code 2000
    • Vehicle Standards Regulations 2002
    • Dangerous Goods Code 7th Edition
    • Occupational Safety and Health Act

  • Dangerous Goods Awareness
    Open or Close
    Course Duration
    Half Day 8:00am to 12:00pm
    Course Start Date/s

    10 July 2018
    14 August 2018
    11 September 2018
    9 October 2018
    Course Cost
    $200 per student

    This course can be contextualised to cater for your company needs.

    Only participation certificates will be issued

    Content

    • Placarding of vehicles, packaged and placardable units
    • Stowage and segregation
    • Transport procedures
    • Provision of Emergency Equipment
    • Classification of Dangerous Goods
    • Transport Documents
    • Packaging of Bulk Goods

  • Explosives Course
    Open or Close
    Course Duration
    1 Day
    Course Start Date/s
    Course Cost
    $270.00 per student
    Course Code
    TLID2016 (Load and unload explosives/dangerous goods)

    Content

    • Stowage and Segregation
    • Transport Procedures
    • Characteristics and Hazards of explosives Divisions 1.1, 1.2, 1.3, 1.4, 1.5 and 1.6
    • Fire Extinguisher Training
    • Documentation
    • Legislation
    • Classification of explosive substances
    • Marking of Packages
    • HAZCHEM Code
    • Placarding of vehicles, Freight containers, Carry boxes and IBC’S

  • Chain of Responsibility - Level 1 - Frontline Staff
    Open or Close
    Course Duration
    1 Day 8:00am to 4:00pm
    Course Start Date/s
    11 May 2018
    8 June 2018
    6 July 2018
    3 August 2018
    14 September 2018
    Course Cost
    $250.00 per student
    Course Code
    TLIF0001

    This course is designed for frontline staff in operational and individual job roles such as lead schedulers/fleet organisers, packers, loaders and drivers or any staff have influence over these roles. In particular with understanding WA vs Heavy Vehicle National Law (HVNL), This course will provide students with the skills and knowledge to follow the requirements of the Chain of Responsibility legislation, as per their role and the understanding of others roles and impact in the supply chain.  The course is delivered face-to-face and include workbooks and tools to support an assessment of CoR compliance and enable participants to understand and apply their knowledge and skill to CoR compliance responsibilities and appropriate work practices and requirements in your organisation.

    The knowledge and skills covered in this course directly relates to the nationally recognised unit of competency

    Apply Chain of responsibility Legislation, Regulations and Workplace Procedures (TLIF0001)

    This course is assessed through assessing your knowledge with the use of tasks, short answer, practical and verbal based assessments.

    The outcomes of this course will enable the participant to:

    • Understand and Explain the Chain of Responsibility law, as it relates to WA’s compliance and enforcement chain of responsibility laws and those relating to Heavy Vehicle National Law.
    • Understand and explain the requirements and need for adequate and safe load restraint, appropriate load mass and dimension.
    • Understanding and prevention of driver fatigue and speed related requirements as linked to WA and HVNL.
    • Participants must be able to distinguish and explain the difference between WA compliance and enforcement- CoR requirements and Heavy vehicle national law, and communicate  action required in regards to the  CoR controls required and identifying the consequences of not following such standards.
    • Key requirements are identifying, understanding and explaining key roles and responsibilities,
    • Action and requirements to areas covered under CoR in under WA and HVNL.
    • Identify and explain potential examples or actual breaches of the chain of responsibility law and what action is required by key stakeholders in the chain in regarding to identification, reporting, documentation and prevention.
    • Breach examples linked to Consequences, breach categories and potential outcomes
    • Identify, understand and explain Reasonable steps to defence.

    The Chain of Responsibility legislation is contained in the Road Traffic (Vehicles) Act 2012 and the Road Traffic (Administration) Act 2008 and needs to be viewed in conjunction with the new regulations. The legislation is accessible on the State Law Publisher’s website:

    https://www.slp.wa.gov.au/legislation/statutes.nsf/main_mrtitle_4471_homepage.html


    http://www.slp.wa.gov.au/legislation/statutes.nsf/main_mrtitle_12926_homepage.html

    Please Note: Attending this training can assist in meeting, understanding and applying the compliance and legislative requirements that are a must for all parties in the transport chain.

  • Chain of Responsibility - Level 2 - Supervisors and Managers
    Open or Close
    Course Duration
    1 Day 8:00am to 4:00pm
    Course Start Date/s
    Course Cost
    Course Code
    TLIF0002

    It's a prequsite that participants in this course will have completed the Level 1 - Frontline Staff - Apply chain of responsibility legislation, regulations and workplace procedures (TLIF0001)

    This course is designed for frontline Managers and Supervisors.  In particular with understanding WA vs Heavy Vehicle and National Law (HVNL) and where roles such as lead schedulers/fleet organisers, packers, loaders and drivers or have influence over these roles. The course supports Managers and Supervisors to implement CoR compliant work practices. The courses are delivered face-to-face and include workbooks and tools to support an assessment of CoR compliance and enable supervision of CoR compliance systems in your organisation.

    The Management training covered in this course directly relates to the nationally recognised unit of competency

    Administer Chain of Responsibility Policies and Procedures (TLIF0002)

    This one day face-to-face training includes assessments with a series of written, verbal and practical based assessment requirements. A portfolio of evidence and workplace projects can also be used as evidence of submission and used during training to link and relate to your workplace and administrative controls to show review of your current policies, procedures and other documentation to gauge currency, relevant and ensuring they meet CoR requirements, and how or what can be amended or looked at to ensure roles and responsibilities can be communicated, understood and executed.

    The outcomes of this course will enable the participant to:

     

    • Explain CoR framework, policies, procedures and tools (WA VS HVNL)
    • Ensure the Implementation of  existing policies, procedures and tools in the workplace
    • The ability to Review and update workplace procedures and tools to ensure they meet CoR requirements
    • Understand and complete the required CoR related records, conduct analysis, document and reports outcomes and implementation needs
    • Identify impacted roles within the work area and improvements
    • Communicate responsibilities to the roles within their work area to ensure continuous improvement and compliance

    The Chain of Responsibility legislation is contained in the Road Traffic (Vehicles) Act 2012 and the Road Traffic (Administration) Act 2008 and needs to be viewed in conjunction with the new regulations. The legislation is accessible on the State Law Publisher’s website:
     

    https://www.slp.wa.gov.au/legislation/statutes.nsf/main_mrtitle_4471_homepage.html


    http://www.slp.wa.gov.au/legislation/statutes.nsf/main_mrtitle_12926_homepage.html

    Other useful links:

    https://www.mainroads.wa.gov.au/UsingRoads/HeavyVehicles/Compliance/Pages/CoR.aspx

    https://www.nhvr.gov.au/safety-accreditation-compliance/chain-of-responsibility

  • Chain of Responsibility - Level 3 - Managers and Directors
    Open or Close
    Course Duration
    1 Day 8:00am to 4:00pm
    Course Start Date/s
    Course Cost
    Course Code
    TLIF0003

    It's a prequsite that participants in this course will have completed the Level 1 - Frontline Staff - Apply chain of responsibility legislation, regulations and workplace procedures (TLIF0001)

     

    This course is designed for Senior Managers, Owners and those higher in the chain that are outlined and covered by Chain of Responsibility laws. It enables Senior Managers and higher level staff members in the chain to design and implement appropriate CoR policies, procedures, and tools aligned to their business needs, compliance, legislation and accreditation requirements. This face-to-face course includes workbooks, tools and a suite of policy and procedure templates to support CoR review and implementation in your organisation.

    The senior level management and Executive Training covered in this course directly relates to the nationally recognised unit of competency

    Develop and implement policies and procedures to ensure chain of responsibility compliance ( TLIF0003)

    This one day, face to face training includes assessments with a series of written, verbal and practical based assessment requirements. A portfolio of evidence and workplace projects can also be used as evidence of submission and used during training to link and relate to your workplace and administrative controls, to allow you direct, visual connection and control and working through these documents as linked to course outcomes and requirements. This course will help you ensure and be confident in assessing COR business needs, review and develop or amend current or new policies, procedure and tools to ensure adequate monitoring, review and analysis of requirements within your business and team.

    The outcomes of this course will enable the participant to:

    • Explain CoR framework, policies, procedures and tools (WA VS Heavy Vehicle National Law)
    • Assess business policies, procedures and tools
    • Develop required new policies, procedures and tools
    • Validate existing policies, procedures and tools
    • Update existing policies, procedures and tools
    • Monitor, review, analyse and make changes or evaluate effectiveness, outcomes, controls and standards.   

    The Chain of Responsibility legislation is contained in the Road Traffic (Vehicles) Act 2012 and the Road Traffic (Administration) Act 2008 and needs to be viewed in conjunction with the new regulations. The legislation is accessible on the State Law Publisher’s website:
     

    https://www.slp.wa.gov.au/legislation/statutes.nsf/main_mrtitle_4471_homepage.html


    http://www.slp.wa.gov.au/legislation/statutes.nsf/main_mrtitle_12926_homepage.html

    Other useful links:

    https://www.mainroads.wa.gov.au/UsingRoads/HeavyVehicles/Compliance/Pages/CoR.aspx

    https://www.nhvr.gov.au/safety-accreditation-compliance/chain-of-responsibility

  • Order Picking Forklift Truck
    Open or Close
    Course Duration
    1 Day
    Course Start Date/s
    Course Cost
    $265.00 per student
    Course Code
    TLILIC2002 (Licence to operate an order picking forklift truck)

    National High Risk Work (HRW) License - License to operate an Order Picking Forklift Truck (LO)

    This mandatory license requirement is for users of an Order Picker Forklift as Load/Stock handling equipment where the operator is raised up in the operator console along with the load carriage/forks.

    Illuminate Group offers on-site training & assessment by an Accredited Worksafe Assessor  in compliance Worksafe Regulations.

    Course outcomes on being deemed “Competent”

    Worksafe Notice of Satisfactory Assessment

    Green copy of above document which serves as a legal Interim HRW License valid for 60 days

    Statement of Attainment TLILIC2002 issued by the Registered Training Organisation

    Application form to Worksafe WA for  the photo License on payment of application fee of $82.00 per application to be lodged by assesse within the 60 day validity of the Interim License.

    License valid for 5 years

    Pre-requisites

    Applicants must be 18 years of age

    Applicants should have literacy ,numeracy skills and a knowledge of English to progress the “closed book” written and calculations assessment.

    Course Content and details can be sent out on request/booking.

    Course Location
    Please note, our Order Picker training is conducted on the employer's site with a minimum of 3 participants required.

     

  • 2 Day Licence to operate a forklift truck
    Open or Close
    Course Duration
    2 Days
    Course Start Date/s
    Course Cost
    $385.00 per student
    Course Code
    TLILIC2001

  • 1 Day Licence to operate a forklift truck
    Open or Close
    Course Duration
    1 Day
    Course Start Date/s
    Course Cost
    $250.00 per student
    Course Code
    TLILIC2001

    Please note our forklift training is held on the employers site and a minimum of 3 participants is required.

  • Heavy Vehicle Pilot Escort Training
    Open or Close
    Course Duration
    3-4 Days depending on numbers. (Min 6 Participants) Please confirm upon booking
    Course Start Date/s
    12 March 2018
    14 May 2018
    16 July 2018
    17 September 2018
    12 November 2018
    Course Cost
    $1,250.00 per student
    Course Code
    TLIB2004 (Carry out vehicle inspection), TLIE3009 (Use pilot and escort communication), TLIC3010 (Pilot or escort oversized and/or overmassed loads), TLIF3060 (Control traffic as a pilot vehicle operator) & TLIF3013 (Coordinate breakdowns and emergencies)

    Heavy Vehicle Pilot Escort Training

    This is an Accredited Pilot Vehicle Course and on completion allows pilots to work Australia wide.  The course runs for four days and is endorsed by Main Roads WA.  Our trainers have extensive experience in the mining industry and are current, highly experienced Pilot Escorts who hold their certificate IV in Training and Assessment. 

    The course is designed for anyone wanting to escort Oversize/Overmass trucks. It is also advantageous for anyone considering a career in the Mining Industry. The course is extremely beneficial for people working within the Transport industry who may be required to escort any oversize/overmass trucks. Pilot Accreditation completed in WA is the only course that is recognised Australia wide, therefore allowing you to work Nationally. It is beneficial for Farmers and Farm Workers to also complete this course as they frequently have the need to move Oversize farm machinery.

    The course content is split in to 5 units of competency. These are:

    TLIB2004 - Carry out vehicle inspection
    TLIE3009 - Use pilot and escort communication
    TLIC3010 - Pilot or escort oversized and/or overmassed loads
    TLIF3060 - Control traffic as a pilot vehicle operator
    TLIF3013 - Coordinate breakdowns and emergencies

    The four day course allows for both classroom and practical on the road experience. This course is largely practical based, however, there are several theory assessments and requires literacy and numeracy skills.

    Our course is delivered by TAE Certificate IV Trainers who are also Accredited Pilots. This allows us to bring their on the job experience into the classroom and provide you with the credible and relevant training. 

    Please go to the Mainroads website for more information: https://project.mainroads.wa.gov.au/heavyvehiclepilot/Pages/default.aspx

    Heavy Vehicle Pilot Refersher course is available (1 Day duration), if interested, please make an enquiry with the Illuminate Group

  • Heavy Vehicle Pilot Escort Refresher Training
    Open or Close
    Course Duration
    2 Days 8:00am to 4:00pm
    Course Start Date/s
    12 March 2018
    14 May 2018
    Course Cost
    $350.00 per student

    The Heavy Vehicle Pilot Escort refresher training will reinforce compliance requirements to ensure currency of knowledge.

     

    Participants will attain a certificate of participation.

     

    Should you have any questions in relation to why you need this refresher training, please refer to the Mainroads Website: https://project.mainroads.wa.gov.au/heavyvehiclepilot/Pages/default.aspx

  • First Aid Training
    Open or Close
    Course Duration
    1 Day
    Course Start Date/s
    Course Cost
    $175.00 per student
    Course Code
    HLTAID001, HLTAID002, HLTAID003

  • Fatigue Management
    Open or Close
    Course Duration
    Half a day
    Course Start Date/s
    Course Cost
    $200.00 per student
    Course Code
    TLIF2010 (Apply fatigue management strategies)

    Fatigue Management Course Content: 

    -        Cause and effects of fatigue for drivers

    -        Manage fatigue in a driving environment in accordance with the requirements of national fatigue management regime and the WA commercial driver’s code of practice

    -        The causes and indicators of fatigue

    -        Driver’s responsibilities

    -        Identify suitable fatigue counter measures

    -        Discussing fatigue as an OH&S issue with reference to OH&S Legislation.